Sale!

MB Quart – RA1-710.5 – Audio Amplifier

$314.99

MB Quart RA1-710.5 Reference 700 Watt 5 Channel Amplifier with Bass Remote.

SKU: DTBK-RA1-710.5 Category:

Description

Through research, innovation, and a dedication to the highest standards of sound quality, MB Quart continues to grow its product line throughout its 50 year history.

Additional Attributes:

GTIN: 00806576232674
Amp Power @ 4 Ohms (ch x watts): 4 x 50 + 1 x 150 Ch5
Amp Power Terminal 12v/GND: 4 AWG
Amp Signal to Noise: > 101dB
Amp Speaker Level Audio Inputs: RCA
Amp Speaker Terminal Wire Gauge: 12 AWG
Amp Subsonic Filter: OFF/25Hz
Amp Total Channels: 5
Amp Total Harmonic Distortion (THD): < 0.07% Amp Variable High Pass Crossover 12dB per Octave: CH1 & CH2: Switched Full/HPF 50Hz-250Hz, CH3 & CH4: Switched Full/HPF 50Hz-250Hz
Amp Variable Low Pass Crossover 12dB per Octave: CH5 ONLY: Variable 50Hz-250Hz
Amp Variable Voltage: 0.02-9V
Auto Turn-On: DC SIGNAL SENSE: The DC SIGNAL SENSE switch will allow the amp to turn on when a signal is received on the RCA inputs, so an amplifier remote turn on wire is not needed to turn on the amplifier. This feature can also be turned off.
Bass Remote Included: Included: Wired Bass Remote allows adjustments to bass frequencies to be made from the control mounted anywhere in the vehicle.
Class / Topology: Innovative use of Class SQ (Class D) for full range and a Class Q1 (Class-D) amplifier to drive the subwoofer frequencies.
Color: Black
Connection Type: Secure connection for all power, ground and speaker connections.
Crossover Type: Variable electronic crossovers allow for complete control of the sound.
Each or Pair: Each
Electronic Equalizer: Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier.
Heat Sink: Aluminum: Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration.
High Level Inputs: See Auto-Sense Feature.
Low Noise Preamplifier Circuit: Q-Stasis Pre Amplifier Stage: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion.
Master Pack Qty: 4
Master Pack Size (in): 19 x 16.5 x 9
Master Pack Weight (lbs): 30
Operation Mode: 2 / 4 / 5 Channel
Output Connections: Heavy duty connections allow for secure electrical signal to pass into wiring and resist erosion which will add longevity to the amplifier.
Output Device Technology: FLUID-FETS: MB Quart output devices, FLUID-FETS are painstakingly selected for their ability to efficiently produce power and mimic the sound quality of the highest end home amplifiers.
Power Supply: Rugged MOSFET Pulse Width Modulation power supply: Allows amplifier to product efficient power without taxing the vehicle electrical system.
Product Contains Rechargeable Battery: No
Prop 65 Warning Label: WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
RCA Inputs: Nickel-Plated: High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant.
Series: Reference
Type: Amplifier
Add-On: N/A
Amp Bass Boost: 0-12dB
Amp Class: Class SQ (Class D), Class Q1 Mono: Channel 5 (Class D)
Amp Crossover: Electronic
Amp Frequency Response: 10Hz-250Hz
Amp Fusing: 80A External
Amp Max Power (watts): 700 Watts
Amp Power @ 1 Ohm (ch x watts): 1 x 350 Ch5 Only
Amp Power @ 2 Ohms (ch x watts): 4 x 100 + 1 x 150 Ch5

Extended Information:

Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 18.5 x 8.5 x 4.0 inches
Weight: 7.40 PG

Additional information

Weight 7.40 lbs
Dimensions 18.5 × 8.5 × 4.0 in

Reviews

There are no reviews yet.

Be the first to review “MB Quart – RA1-710.5 – Audio Amplifier”

Your email address will not be published. Required fields are marked *