Mishimoto Subaru BRZ / Scion FR-S Performance Air Intake, 2013+ Black

Description

Add easy horsepower to your 2013+ BRZ/FR-S with the Mishimoto Subaru BRZ / Scion FR-S Performance Air Intake! We understand that removing the front bumper of your new BRZ/FR-S is not ideal, so our engineers designed this Performance Air Intake to develop a 7 whp / 5 wtq bolt-on power increase with no bumper removal required. In addition to the impressive power increase, our engineering team ensured that safe A/F ratios are maintained throughout the entire powerband. This intake uses a silicone induction hose and aluminum intake pipe that provides a smooth path for airflow. Additionally, the CNC-machined mass airflow (MAF) housing and air straightener ensure laminar airflow across the sensor to provide accurate readings. The kit also includes a fully serviceable Mishimoto oiled air filter, which provides a 16-percent increase in filter surface area, allowing for greater airflow and superior filtration. The Mishimoto BRZ / FR-S Performance Cold-Air Intake includes a powder-coated airbox to ensure the hot engine bay does not heat soak the air filter. The engineers at Mishimoto designed the airbox to fit properly with the Mishimoto BRZ / FR-S Oil Cooler Kit. This intake provides power you can hear! It is a huge upgrade for intake noise and provides a nice throaty intake tone, especially under full throttle. For personalized styling, we offer this kit with a black, blue, or red silicone induction hose. As with all our products, this intake kit includes the Mishimoto Lifetime Warranty.in

Additional Attributes:

GTIN: 00748354020212
TechSpec Engine Codes: 3.5L EcoBoost
Prop 65 – Short Label: prop65_warning.jpg
TechSpec Applications: Ford F-150 Raptor V6 EcoBoost (3.5L) 2017-2020
Prop 65 (C, R or CR): CR
TechSpec Note: This product requires 3 minor modifications to your vehicle for installation. Each alteration is highlighted in detail in both our written installation guide and video tutorial.—-1. If using in conjunction with the OEM airbox, an inlet duct cutout on the lower airbox is required—-2. Requires minor modification to the inner A-pillar for assembly (not visible from outside of vehicle)—-3. Requires minor trimming behind OEM fender grille. This modification will not impact re-assembly of the grille if snorkel is removed—-This kit is designed specifically for the Raptor, it will not fit with other F-150 trim levels due to body panel differences.—-This snorkel kit is designed to fit with the OEM airbox or Mishimoto Performance Intake System. Fitment is not confirmed with any other aftermarket intake systems.
Prop 65 Yes/No: Yes
TechSpec Caution: This snorkel alone does not increase the vehicle’s water fording limit. Fording water above the stock recommended limit may require modifying other components to avoid water damage.
TechSpec Includes: (1) Borne Off-Road Snorkel Tube–(1) Borne Off-Road Fender Tube–(1) Borne Off Road Snorkel Inlet–(1) Snorkel-To-Airbox Adapter–(1) Snorkel-To-Airbox Adapter Rubber Duct–(1) Fender Tube Mounting Bracket–(1) Snorkel Tube Mounting Bracket–(1) Snorkel Inlet Screen–(1) Fender Bracket Peg–(1) Airbox Inlet Plug (Grille Duct)–(1) Fender Bracket Grommet–(1) 4.25″ T-Bolt Clamp–Mounting Hardware–Mishimoto Lifetime Warranty
SellingPoint01: Direct fit for the 2013+ Subaru BRZ and Scion FR-S
SellingPoint02: Provides 7 whp / 5 wtq gains while maintaining A/F ratios with no additional tuning
SellingPoint03: No bumper removal required and installs in under 30 minutes
SellingPoint04: Designed to fit with the Mishimoto BRZ / FR-S Oil Cooler Kit and Mishimoto Oil Fill Cap
SellingPoint05: Black powder-coated airbox keeps unwanted hot air from entering the air filter
SellingPoint06: Wrinkle black aluminum intake pipe includes CNC-machined MAF housing and air straightener
SellingPoint07: Fully serviceable oiled air filter provides 16-percent increase in filter surface area compared to the stock filter
SellingPoint08: Improves engine tone
SellingPoint09: Smooth design eliminates restrictions and improves airflow
SellingPoint10: Available with a black, blue or red silicone induction hose
SellingPoint11: Designed in Delaware, USA and filter made in USA
SellingPoint12: Mishimoto Lifetime Warranty
SellingPoint13: CARB EO number: D-759-3
SellingPoint14: N/A
SellingPoint15: N/A
CARB EO Number: D-759-3
Install Difficulty: 2
OptionLabel: Black
Color: Black
TechSpec Air Filter Part Number: N/A
Finish: Powder-Coat
TechSpec Filter Diameter: N/A
Installation Difficulty: 2
TechSpec Chassis Codes: P552
Material: Steel

Extended Information:

Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA